Determination of Critical Strains in Isotactic Polypropylene by Cyclic Loading-Unloading

Autor(en)

Florian Spieckermann, Harald Wilhelm, Erhard Schafler, Elias Aifantis, Michael Zehetbauer

Abstrakt

By analyzing the deformation of alpha¿isotactic polypropylene through cyclic uniaxial compression at different temperatures¿conclusions are drawn on the contribution of the crystalline phase and the amorphous phase to the hardening curve. The deformation of the crystalline phase, which deforms mainly by simple shear of the crystallites, strongly depends on the properties of the amorphous phase. A separation of strain in a relaxing and a quasipermanent part, as introduced by the work of Hiss et al. (1999, ¿Network Stretching, Slip Processes and Fragmentation of Crystallites During Uniaxial Drawing of Polyethylene and Related Copolymers,¿ Macromolecules, 32, pp. 4390¿4403), is undertaken. By this experimental procedure it is possible to characterize the deformation dependence of several physical quantities such as Young's modulus or the stored energy associated to each loading-unloading cycle. Furthermore specific transition strains, A, B, C, and D, can be determined where the recovery properties change. It is demonstrated that beyond point C the strain hardening can be described by the simple rubber hardening model of Haward (1987, ¿The Application of a Simplified Model for the Stress-Strain Curve of Polymers,¿ Polymer, 28, pp. 1485¿1488).

Organisation(en)

Physik Nanostrukturierter Materialien

Externe Organisation(en)

Aristotle University of Thessaloniki, TGM - Technologisches Gewerbemuseum

Journal

Journal of Engineering Materials and Technology

Band

131

Anzahl der Seiten

5

ISSN

0094-4289

DOI

https://doi.org/10.1115/1.3030938

Publikationsdatum

2009

Peer-reviewed

Ja

ÖFOS 2012

1030 Physik, Astronomie

Link zum Portal

https://ucrisportal.univie.ac.at/de/publications/809299d8-3a89-47b5-8131-83da97ab8234